Introduction
Prerequisites
Requirements
Components Used
Topology
Purpose
Setting up the SmartBits port for LDP
Configuring the LDP neighbors, advertise FECs, and start the sessions
Using the Traffic Wizard to send traffic to advertised FECs
Creating a Traffic Group and monitoring for traffic loss
The purpose of this document is to provide the user step-by-step
instructions to setup dual
LDP sessions, advertise FECs, send labelled traffic to the DUT, and
track individual streams
using Spirent's TeraRouting Tester (TRT).
The following HW/SW are required:
The following components were used:
*** NOTE:
Before starting, please connect to the chassis. For help, click here ***
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
Creating a Traffic Group and monitoring for traffic loss
_______________________
_______________________
_______________________
_______________________
| NOTE: For informational use only |