QoS – Setting up and sending traffic with

multiple QoS values

____________________________________________________________________

To Print or View in Word format, click here

Contents

Introduction

Components Used

Configuration Summary

Traffic Topology

Setting up the SmartBits to generate traffic

Using Traffic Wizard to create the streams

Starting and tracking the streams

Adjusting the Transmit load per-port or per-stream

____________________________________________________________________

Introduction

The purpose of this document is to provide the user step-by-step instructions to

manually send traffic with multiple QoS values

Components Used

• Router with two interfaces connected to the SmartBits ports
• SmartBits 6000C chassis with a TeraMetrics module
• TeraRouting Tester software

Configuration Summary

• Setup two SmartBits ports
• Create five streams on each port with different TOS value
• Send bidirectional traffic between both ports
• Adjust the Transmitting Load on both ports

QoS Topology

Setting up the SmartBits ports to generate traffic

Using Traffic Wizard to create the streams

Starting and tracking the streams

Adjusting the Transmitting Load on both ports